Harvester Hammer Mills

The harvester can be used as a static hammer mill by removing one of the v-belts. The harvester head can also be removed and the 6776 pickups can be fitted.

With years of experience and precise development, we have produced a very unique maize harvesting hammer mill.

JF 2-D Hammer Mill


The Harvester Hammer mill has a single row intake and a spacing of 90 cm. Adjustable row spacing head. The dry material is chopped using a rotary blade system, after cutting the material from the ground it pushes it through to the intake auger that crushes the material and steadily feeds the 6776 hammer mill. The harvester hammer mill comes standard with a platform to stand on and replace the bags while milling in the field. There is a hitch to tow a wagon behind the harvester if the user decides on removing the bag cyclone and replacing it with a chute to discharge the material onto a wagon.

Ground speed of 2 km per hour can be reached and approximately 6 hectares a day can be milled depending on the tractor size and the quality of the material being milled.


Screen sizes vary from 0.8 mm to 70 mm.

Disc knives 16
Disc knives speed 316 r.p.m
Rotor speed 580 r.p.m
PTO power ** 40 – 70 kW
Cyclone 2 to 4 outlets
Discharge chute optional
Height adjustable yes

**The recommended tractor size depends on the working conditions, growth and environmental factors.


Johan Steenkamp
Tel: 081 563 4591
Email: Whk.sales1@hochland.com.na

Moses Naujoma
Tel: 081 276 6384


Peter Naujoma
Tel: 081 395 0790
Email: On.manager@hochland.com.na

Christoph Ndjamba
Tel: 081 892 4119
Email: On.parts1@hochland.com.na