Heizohack heavy duty
wood chippers
The manually fed wood chippers for mobile and flexible operation on the spot. The chipper is transported on a trailing axle or the three-point hitch of the tractor.
Heizohack heavy duty wood chippers
Features:
With the HEIZOHACK wood chipping machines, wood waste, such as slats, beams, logs, blocks and branches and whole tree trunks with a diameter of up to 30 cm (300 series) and up to 40 cm (400 series) can be shredded with little energy required. A steel conveyor belt and a pressure roller with welded tongs ensure powerful and reliable feeding of the chipping material.
| MODEL | HM 6-300 | HM 8-400 |
| Feed height (mm) | 300 | 400 |
| Feed width (mm) | 500 | 670 |
| Transport height (mm) | 2422 | 2588 |
| Transport width (mm) | 2265 | 2265 |
| Working height (mm) | 850 | 3502 |
| Working width (mm) | 2965 | 790 |
| Ejection height (mm) | 3419 | 3105 |
| Support load (kg) | 620 | 970 |
| Total length (mm) | 3382 | 3596 |
| Weight (kg) | About 2250 | About 3300 |
| Flywheel mass (kg) | 130 | 470 |
| Feed-in | Conveyor belt: 600 mm, In-feed table: 900 mm, Pressure roller with steel teeth 380 mm diameter |
Conveyor belt: 900 mm, In-feed table: 900 mm, Pressure roller with steel teeth 450 mm diameter |
| Sieve | Standard mesh 35 / 40 mm | Standard mesh 35 / 40 mm |
| Chip drum diameter | 450 mm with quick discharge blades | 495 mm with quick discharge blades |
| Drive | Power take-off shaft, max. 750 r.p.m | Power take-off shaft, max. 750 r.p.m |
| Flywheel diameter | 1120 mm, 60 mm thick | 1370 mm, 60/90 mm thick |
| Ejection | Manually foldable and rotatable, supported by pneumatic shock damper | Manually foldable and rotatable, supported by pneumatic shock damper |
| Controls | Automatic load-dependent RPM control of the feed with two daily and an overall operating hours counters; Belt and roller speed infinitely adjustable |
Automatic load-dependent RPM control of the feed with two daily and an overall operating hours counters; Belt and roller speed infinitely adjustable |
| Chassis | 25 km/h with cable brake and trailing axle, Tyres: 10/75-15.3 |
25 km/h with cable brake and trailing axle, Tyres: 400/60-15.5 |
Windhoek
Reinhardt Van Zyl
Tel: 081 649 3003
Email: whk.sales1@hochland.com.na
Petrus Hangula Part Sales
Tel: 081 767 0283
Email: whk.parts1@hochland.com.na
Moses Naujoma
Tel: 081 276 6384
Ongwediva
Peter Naujoma
Tel: 081 395 0790
Email: on.manager@hochland.com.na
Christoph Ndjamba
Tel: 081 892 4119
Email: on.parts1@hochland.com.na