HJ -4
It is a non-direct feeding chipper, in which the material is fed diagonally into the chippers. The blades draw the wood in themselves, and that makes the work lighter.
The Junkkari HJ 4 chipper is especially suited for environmental and landscape chipping.
HJ-4
Features:
The HJ4 is equipped with a hydraulic feeding device. It has one feed roller, and it gets its power from the tractor’s hydraulics. The HJ-4 requires one pressure valve from the tractor and one return to the feeding device hydraulics. The output needed by the hydraulics system is 20 l/min and pressure a minimum of 140 bars.
The chipper’s disc works like a flywheel and ensures even woodchips regardless of changes in the load. The disk’s blades can be adjusted by the required woodchip size. The chipping disk has blow wings, which efficiently spread the woodchips straight into the environment.
Accessories
- additional blade set (uses 3 blades)
- brush wood blades (uses 3 blades)
| SPECIFICATIONS | |
| Feed opening size | 20 x 17 cm |
| Disc diameter | 43 cm |
| Disc mass | 45 kg |
| Blade count | 3 |
| Revolutions | 540-1000 r.p.m |
| Blade setting | 4-12 mm |
| Max wood diameter | 10 cm |
| Chipping capacity | 2-6 m³/h * |
| Power requirement | 10-35 kW * |
| Weight (kg) | 250 kg |
| Length in working position | 170 cm |
| Length in the transport position | 120 cm |
| Width in working position | 165 cm |
| Width in the transport position | 125 cm |
| Height in the transport position | 190 cm |
* Blade adjustment, sharpness, blade setting, and size and type of wood to be chipped have a significant effect on the power requirement.
Windhoek
Reinhardt Van Zyl
Tel: 081 649 3003
Email: whk.sales1@hochland.com.na
Petrus Hangula Part Sales
Tel: 081 767 0283
Email: whk.parts1@hochland.com.na
Moses Naujoma
Tel: 081 276 6384
Ongwediva
Peter Naujoma
Tel: 081 395 0790
Email: on.manager@hochland.com.na
Christoph Ndjamba
Tel: 081 892 4119
Email: on.parts1@hochland.com.na